I’m pretty new to self-hosting, and the NAS I’m using right now has been a pain since the moment I bought it. The Synology DS220+ just doesn’t have enough CPU power for my needs, and I’ve recently used up all the disk space I installed, so I’m looking for a new server.
Unfortunately, all the options I’ve found online prioritize storage space over CPU, and I haven’t had much luck finding anything that fits my needs.
Requirements: CPU: Intel Core i3 or higher, but preferably Core i5 GPU: Not needed RAM: max 64 GB, min 16 GB Storage: max 32 TB, min 10 TB Network: 10 GB SPF+ Price: max 6K CAD, preferred 3K CAD
I’m hoping to run TrueNAS Scale with Plex and Nextcloud installed, and my media library isn’t likely to get larger than 5 TB, so CPU is really the main limiter of my current NAS.
As an example of something almost perfect: The TrueNAS mini X+ and R varieties would work excellently, but don’t meet the CPU requirement. I wanted to look at the other systems on offer from TrueNAS, but they don’t list out CPU specs for anything more advanced than the Mini line.
Of the Lenovo stuff, since it was one of the few websites with a filterable picker, the ThinkSystem SR630 V2 was the closest of fitting my requirements. It comes short on the CPU, though, and is verging on the price limit too. I also don’t need 12 TB of RAM, or 1.2 PB of storage.
What do you use? Can you recommend any websites I can go to find something that fits my needs better?
You must log in or # to comment.
Have you considered just beige boxing a server yourself? My home server is a mini-ITX board from Asus running a Core i5, 32GB of RAM and a stack of SATA HDDs all stuffed in a smaller case. Nothing fancy, just hardware picked to fulfill my needs.
Limiting yourself to bespoke systems means limiting yourself to what someone else wanted to build. The main downside to building it yourself is ensuring hardware comparability with the OS/software you want to run. If you are willing to take that on, you can tailor your server to just what you want.
This is the way.
My home server literally was just my old desktop for the longest time. I upgraded the components in my desktop, and put them into another case and that became my server. Proxmox is based on Debian so any remotely sane hardware should be supported well, then I just virtualize everything else (including the NAS) and hardware compatibility isn’t even a concern.
My current case is a Fracal Define R4 which natively supports 7 hard drives + 3 5.25 slots so I could add hot swap bays there. If I need more storage I have an extra drive cage, and the suggestion from people online is to just zip tie it to the normal one, and that gets me 11 drives of storage. Sure it won’t look pretty, but it works, it’s cheap, and it’s scalable, and that’s all that matters.
If you think about what the “S” in “NAS” is you’ll realize why they prioritize storage…
You want a general purpose server.
Some good ideas on this site if you are interested in building your own https://forums.serverbuilds.net/t/guide-nas-killer-6-0-ddr4-is-finally-cheap/13956
Thank you! I’ll check it out, it seems to have quite a few good suggestions.
I was going to post the same link, I generally take inspiration from that forum and then adapt with what I can find on eBay etc for cheap. The prices they give are for US eBay and not always suitable to EU eBay.
I’ve just finished my new NAS using Unraid OS and some info from the forum.
- Jonsbo N3 case
- Gigabyte Z590i Vision D motherboard
- Intel i5 10400T
- 2x16Gb DDR4 2666 (basic corsair)
- LSI 9207-8i HBA in IT-Mode
- An old 128Gb M2 SSD
- 8x6Tb HGST SAS drives
- Corsair SF600 PSU
It took me more than 6 months to find all the parts at a correct price but I was not in a rush.
It’s 2.5Gbe and not 10Gb SFP but you get the idea. The cost was really low (lower than 1000) because I already had the HDDs from an older server. It should be around 1500€ max with the disks.
The real downside of doing that is the time it takes but it’s also a kind of pleasure to hunt for parts and one day assemble them all.
I’ve been considering moving to this build in particular for lower power usage and heat output, but they have some other dual socket builds if you want more cpu power.
Ha I came here to suggest the nas killer too. I built the nas killer 3 and it’s been running great for years.
Rack mount server class machines at home generally aren’t great options. Definitely stick with tower/mini designs.
That said, for a home server a general workstation may be best. I personally have a System 76 Thelio. I added a second drive and installed proxmox with a ZFS mirrored pool.
You say you need an i3 or higher but don’t list anything that necessitates that. What do you need that for? N100 is near-ubiquitous in the space.
I was wondering if they were doing CPU transcoding in plex instead of using a client that supports direct playback. A few Apple TVs can generally do the trick at a much lower cost and double as YouTube and other streaming services clients.
I would consider using your Synology for what it’s good at - storage.
My homelab has a Synology DS1618 and servers are Lenovo M90q systems. They have enough compute to get the job done, and use the Synology NFS mount for storage.
Exactly. It’s plenty useful for Network-Attached-Storage. That’s what it’s built for.
Your network needs are a bit over the top, but maybe consider the Minisforum MS-01. Small form factor, i5 or i9, up to 96G. RAM, and 2x SFP, and some low profile PCIE space if needed in the future. This is WAY more than you need for your service needs, and you can just expand your Synology disks for extra storage super easily. Saves money, and solves your problems without needing a full rack-sized server.
Lots of good suggestions here
I’m a bit surprised by your budget. For something just running plex and next cloud, you shouldn’t need a 6 or even 3k system. I run my server on found parts, adding up to just $600-$700 dollars including (used) SAS drives. It runs probably a dozen docker containers, a dns server, and homeassistant. I don’t even remember what cpu I have because it was such a small consideration when I was finding parts.
I’d recommend keeping g your synology as a simple Nas (maybe next cloud too, depending on how you’re using it) and then get a second box with whatever you need for plex. Unless you’re transcoding multiple 4k videos at once, your cpu/GPU really don’t need much power. I don’t even have a dedicated GPU in mine, but I’m basically unable to do live 4k transcodes (this is fine for me)
Are you looking at Dell/HP/Lenovo’s sites? Don’t do that, those are going to be way overpriced and way overkill. Also most of them are rack servers, not really suited to home use. If anything, you’d want to spec it out as a tower workstation.
Personally I build mine out of parts, and usually used parts. Currently I’m using a little U-NAS NS-410 case, and I replaced all the internals with something better. Total cost was less than $400, I think.
No one has brought up Unraid OS specifically yet. Others have said just build your own machine, and yes absolutely this is the way. And then just slap Unraid on that and you have yourself exactly what you’re looking for. It’s user friendly, as powerful as your wallet can handle, and plenty of room for expandability.
I recommend just getting either:
- A cheap prebuilt desktop computer, or
- Build yourself a computer
It doesn’t have to be a “server”.
I made the jump to a full server a few years ago and there’s some pretty high limits but you can get them spec’ed pretty low. Something like a dell r730 Single 8 core xenon 32gb ram and a couple tb of storage running 4-500$. They can be upgraded over time to be dual 16 core xenon 1tb ram and petabyte of storage.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters LXC Linux Containers NAS Network-Attached Storage NFS Network File System, a Unix-based file-sharing protocol known for performance and efficiency NUC Next Unit of Computing brand of Intel small computers PSU Power Supply Unit Plex Brand of media server package RAID Redundant Array of Independent Disks for mass storage SATA Serial AT Attachment interface for mass storage SMB Server Message Block protocol for file and printer sharing; Windows-native SSD Solid State Drive mass storage ZFS Solaris/Linux filesystem focusing on data integrity
[Thread #916 for this sub, first seen 12th Aug 2024, 01:05] [FAQ] [Full list] [Contact] [Source code]
Tiny/mini/micro makes up my server environment (and two customs using old cases and replaced parts).
Storage is a 1520+ and the two customs, with the 1515+ for backups I don’t want to lose (syncs to two other locations).
Tiny/mini/micro is the majority of compute tasks, mostly proxmox, LXC’s, and a few VMs.
The little machines have plenty of processing power, usually nvme but I can add it on if needed. Combine it with network storage, and you don’t need anything else imo.
Bonus is they are small and cheap as off lease machines being auctioned off.
My solution to this question a year or so ago was to take my gaming desktop, which was collecting dust after I moved to my gaming laptop, and gut it down to a 4U server rack case. Best decision I’ve ever made. 12 core Ryzen and 128gb memory. Got a 10g adapter in the pci express, 8xHDD for data and then 2 mirrored nvme for the OS itself. Only thing I kept out was the video card since I had no use for it (yet)
An equivalent “server” on the market would probably cost a fortune and cost you a ridiculous amount of electricity.
If you don’t need enterprise level hardware and support, I can suggest MinisForum. They released the MS01 fairly recently and I believe it fits your specs.
