Only use jellyfin. Have a list of things want to update… but it works for now.

Yes that is a laptop usb cooler used as supplemental placebo cooling. Also a pc fan I have propped up against the hard drive feeding into the pi.

Can’t recall last time used the ps4 or switch. But they’re there

  • vaionko@sopuli.xyzEnglish
    7·
    10 months ago

    An old HP laptop with Debian hosting Klipper and Home Assistant. Waiting for an OTG cable so I could replace the laptop with a phone for less power and heat

    • masterofn001@lemmy.caEnglish
      1·
      10 months ago

      Using phones with a continuous power supply might do nasty things to the battery.

      Source: I finally figured out how to open a glass back phone with no tools.

  • Tuxman@sh.itjust.worksEnglish
    4·
    10 months ago

    So mines a weird hodge-podge of a HP Proliant under a bistro table that I use as a standup desk, and a laptop. Both connected to the displays.

  • Daniel Quinn@lemmy.caEnglish
    4·
    10 months ago

    Seven Raspberry Pi 4’s and one Pi Zero, mounted on some tile “shelves” inside some IKEA furniture.

    Ho ho ho

  • fristislurper@feddit.nlEnglish
    4·
    10 months ago

    This is how I started in a tiny room. I am not proud, but maybe good to show between all the shiny things here.

  • Meldrik@lemmy.wtfEnglish
    2·
    10 months ago

    From top to bottom:

    • Allpower Power Station (UPS with around 4 hours of battery)
    • Unifi gateway
    • Unifi switch
    • Unify CloudKey (Surveillance)
    • Patch panel
    • 1.5U media server
    • Arock Mini running stuff like my Lemmy instance and other self hosted software.

    I’m planning to move my Lemmy instance to its own 1.5U.

    The whole setup uses around 80-100 watts.

  • acannan@programming.devEnglish
    2·
    10 months ago

    The small board you can see is a pi hole

    I do have more tech elsewhere but this pile is comically ugly

  • variants@possumpat.ioEnglish
    2·
    10 months ago

    My 12u setup On top I have two pi’s; home assistant and pihole The ONT for fiber, hue bridge, and hdhomerun.

    My dream machine pro
    Patch panel
    48 port switch i got from coworker
    Patch panel
    My unraid server
    jbod
    Battery UPS

    • jubilationtcornpone@sh.itjust.worksEnglish
      1·
      10 months ago

      Ok, now this is just showing off. Patch cables all the exact required length and everything all nice and neat. I bet you check your backups regularly and do a monthly DR fail over test too.

      …Kidding aside, your setup looks really good.

      • variants@possumpat.ioEnglish
        0·
        10 months ago

        Haha I need more Patch cables to get rid of those long ones. Also when I opened up the cabinet for this Pic I noticed the left fan isn’t dusty like the rest so it might be dead x_x

  • dblsaiko@discuss.tchncs.deEnglish
    1·
    10 months ago

    The disks are the most uggo part. They’re a bunch of old disks of varying sizes with a RAID+LVM setup to make the most use of them while still being redundant.

    lsblk output of the whole thing 
    saiko@vineta ~ % lsblk
NAME                    MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINTS
sda                       8:0    0 111.8G  0 disk  
├─sda1                    8:1    0   512M  0 part  /Volumes/Boot
└─sda2                    8:2    0 111.3G  0 part  /nix/store
                                                   /
sdb                       8:16   1 372.6G  0 disk  
└─sdb1                    8:17   1 372.6G  0 part  
  └─md1                   9:1    0   1.5T  0 raid5 
    └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
sdc                       8:32   1 465.8G  0 disk  
├─sdc1                    8:33   1 372.6G  0 part  
│ └─md1                   9:1    0   1.5T  0 raid5 
│   └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
└─sdc2                    8:34   1  93.1G  0 part  
  └─md2                   9:2    0 279.3G  0 raid5 
    └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
sdd                       8:48   1   4.5T  0 disk  
├─sdd1                    8:49   1 372.6G  0 part  
│ └─md1                   9:1    0   1.5T  0 raid5 
│   └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
├─sdd2                    8:50   1  93.1G  0 part  
│ └─md2                   9:2    0 279.3G  0 raid5 
│   └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
├─sdd3                    8:51   1 465.8G  0 part  
│ └─md3                   9:3    0 931.3G  0 raid5 
│   └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
└─sdd4                    8:52   1   3.6T  0 part  
  └─md4                   9:4    0   3.6T  0 raid1 
    └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
sde                       8:64   1   7.3T  0 disk  
├─sde1                    8:65   1 372.6G  0 part  
│ └─md1                   9:1    0   1.5T  0 raid5 
│   └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
├─sde2                    8:66   1  93.1G  0 part  
│ └─md2                   9:2    0 279.3G  0 raid5 
│   └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
├─sde3                    8:67   1 465.8G  0 part  
│ └─md3                   9:3    0 931.3G  0 raid5 
│   └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
└─sde4                    8:68   1   3.6T  0 part  
  └─md4                   9:4    0   3.6T  0 raid1 
    └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
sdf                       8:80   1 931.5G  0 disk  
├─sdf1                    8:81   1 372.6G  0 part  
│ └─md1                   9:1    0   1.5T  0 raid5 
│   └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
├─sdf2                    8:82   1  93.1G  0 part  
│ └─md2                   9:2    0 279.3G  0 raid5 
│   └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
└─sdf3                    8:83   1 465.8G  0 part  
  └─md3                   9:3    0 931.3G  0 raid5 
    └─storagevg-storage 254:0    0   6.3T  0 lvm   /Volumes/storage
sr0                      11:0    1  1024M  0 rom
  • PerogiBoi@lemmy.caEnglish
    1·
    10 months ago

    Wait so you have like rack mounted server but only run jellyfin? Am I missing something here ?

    • Anivia@feddit.orgEnglish
      0·
      10 months ago

      Wait so you have like rack mounted server but only run jellyfin?

      What would be wrong with that?

      • PerogiBoi@lemmy.caEnglish
        0·
        10 months ago

        I considered it pretty heavy equipment for just a single service but that’s coming from my experience running like 8 vms on an old gaming pc and tearing my hair out over how janky it all looks (it works fantastically for me tho)

        • Anivia@feddit.orgEnglish
          0·
          10 months ago

          I guess it depends on your library size and how many users you are serving. My plex server has a library of over 110 TB and over 60 users, so to me a rack mount server for Jellyfin alone doesn’t sound overkill at all

      • SanguineBrah@lemmy.sdf.orgEnglish
        0·
        10 months ago

        It’s a GPO 706, which is a classic British bakelite phone from the '60s. I have it hooked up to a SIP trunk through an OBi 100. Right now it can receive calls but not make them because I haven’t gotten around to sorting out a pulse-to-tone dialing converter yet.

  • Retro_unlimited@lemmy.worldEnglish
    1·
    10 months ago

    I’m in the middle of moving so everything is packed up. But this was the rack before we moved.

    Networking, 3D printer, black and white laser printer and a color laser printer, several servers.

    I had home assistant, Plex, Minecraft server, 7 days to die server, and many other services.

    Servers are Ryzen 5950x and the other is a threadripper 24 core.

    The other side of the rack was HDMI switchers and some game consoles.

    Going to miss the 1gbps fiber internet, we now have Starlink.